Serving the Oceanside area  ·  (442) 333-2316  ·  Open Mon-Sun 7am-7pm
📞 (442) 333-2316 Free Quote

Metal Roofing in Rancho Santa Fe, CA (92067) · Local Professionals

Oceanside Metal Roofing · Fast response in Rancho Santa Fe and the Oceanside area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (442) 333-2316
+283Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Rancho Santa Fe is not like the rest of North County. The lots are large, the oaks are old, and the homes, many of them Spanish Revival estates and custom builds tucked behind hedges and gates, were never designed for a cookie-cutter roof. Drive down La Granada or past the Rancho Santa Fe Golf Club and you will see what we mean: clay tile, stone-coated steel, and copper details that have to look right from the road and hold up under intense inland sun.

We are Oceanside Metal Roofing, and we work Rancho Santa Fe (92067) because the housing stock here demands a roofer who understands both style and wildfire reality. When a homeowner near The Bridges or off Del Dios Highway calls us, it is usually because a concrete tile roof is cracking, a stone-coated steel system has faded, or an insurer is asking for Class A fire-rated documentation. We handle those jobs with fully insured crews and a Metal Roofing Alliance membership behind us.

Metal Roofing in Rancho Santa Fe (92067)

The terrain here changes fast. You can be on a flat, oak-shaded parcel near the village one mile and on a steep, chaparral-covered slope above the San Dieguito River Valley the next. That means two things for a roof: access and drainage. On hillside lots, getting materials and a crew safely to the roof often means planning staging on a narrow driveway or using a lift rather than a ladder. On the valley floor, winter atmospheric-river storms can dump rain quickly, so we pay close attention to valley flashing, gutter sizing, and where water actually leaves the roof. The dry Santa Ana winds that follow fire season are just as important. They lift panels, dry out sealants, and expose any fastener that was not set right the first time. In a community where cracked concrete tile and older shingle roofs are common, we often recommend stone-coated steel to keep the Spanish tile look at a fraction of the weight, or standing seam where a cleaner, more modern profile fits the architecture.

Our team has worked throughout Oceanside and the surrounding North County area, including the estate properties and horse properties that define Rancho Santa Fe. We know the difference between a roof that looks good in a listing photo and one that survives a decade of sun, wind, and the occasional earthquake.

Our services in Rancho Santa Fe

How a Job Works in Rancho Santa Fe

Step 1: You call (442) 333-2316, and we schedule a free on-site assessment. We walk the roof, check the attic or underlayment where accessible, and look at the flashing, fasteners, and drainage. You get a written estimate with options, not a pressure pitch. For estate properties, we also note where equipment can stage without damaging landscaping or blocking a private drive.

Step 2: Once you approve, we handle the work. In Rancho Santa Fe, that often means coordinating with an HOA or design review committee before a panel profile or color is finalized, and pulling the roofing permit through the local building department. We confirm the scope, protect the landscaping, and keep the site organized. If a roof is being replaced over existing shingles, we verify the layer count against code before we start. Our crews are fully insured, with general liability and workers' compensation, and we treat a gated property with the same care as a family home.

Step 3: We clean up, haul away debris, and do a final walkthrough with you. We check that gutters flow, that flashing is sealed, and that the roof looks the way it should from the driveway and from the garden. You should not find a single screw or scrap of metal left behind.

Pricing in Rancho Santa Fe reflects the size and complexity of the properties here. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, and stone-coated steel or metal shingle roofing around $9. A full replacement typically starts near $9 per square foot, while a retrofit over existing shingles starts around $7. For smaller jobs, metal roof repair and leak repair start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Copper and specialty metal roofing is a different tier, starting around $20 per square foot, which is common on the higher-end estates. The final number depends on roof size, pitch, access, the condition of the existing roof, and how quickly you need it done. Call (442) 333-2316 for a free estimate and a straight answer.

✅ Metal Roofing Alliance Member, licensed and insured for work in Rancho Santa Fe and nearby areas.

My Rancho Santa Fe home has a concrete tile roof that is cracking. Can you match the Spanish tile look with metal?
Yes. Stone-coated steel is the usual choice for that here. It comes in profiles and colors designed to mimic barrel or flat tile, and it weighs far less than concrete tile, which matters on older structures. We can bring samples so you can see how it reads against your stucco and trim before you commit.
A storm just lifted panels on my roof off Del Dios Highway. How fast can you respond?
We treat wind-lifted panels and active leaks as priority calls. Call (442) 333-2316 and describe what you see; we will schedule an inspection and, where needed, make a safe temporary repair before the permanent fix. After the 2017 Lilac Fire and the atmospheric-river storms since, we have seen how quickly a small gap becomes a ceiling stain.
What does a typical stone-coated steel or standing seam roof cost in 92067?
Most Rancho Santa Fe installations fall in the range of $9 to $10 per square foot for stone-coated steel or standing seam, with the total driven by square footage, roof complexity, and whether we are replacing or retrofitting. Larger estate roofs and steep pitches push the number up. We give you a written, itemized estimate after the free inspection.
Do I need a permit to replace my roof in Rancho Santa Fe, and who enforces it?
A full replacement or re-roof generally requires a permit, and the rules, fees, and inspection steps vary by jurisdiction. We always confirm the current requirements with the local building department before work starts. You can also check the County of San Diego website, which serves as the official city site for Rancho Santa Fe, for general information: https://www.sandiegocounty.gov. We handle the paperwork as part of the job.
My HOA wants to approve the roof color. Can you help with that process?
Yes. Many Rancho Santa Fe properties are subject to HOA or design review, and panel profile and color are often restricted. We can provide product samples, manufacturer color chips, and specification sheets for the committee, and we will not order material until the approval is in hand. If your neighbor's property line is close, we also confirm setbacks and drainage direction so the new roof does not create a dispute.
Are you insured for work on a large estate property in Rancho Santa Fe?
We are fully insured, with general liability and workers' compensation coverage. We are happy to provide a certificate of insurance before we start, and our crews are trained to work around landscaping, gates, and private drives without damage.
What maintenance should I do on a metal roof in Rancho Santa Fe between fire seasons?
Have the roof inspected before the Santa Ana winds arrive. We check fasteners, sealant at flashing and penetrations, and debris in valleys and gutters. In this climate, sun and dry wind age sealant faster than rain does, so a screw replacement and re-fastening visit every few years is cheaper than chasing a leak later. We also clear oak leaves and palm fronds, which trap moisture and hide problems.

Nearby service areas

📍 Oceanside 92054📍 Carlsbad 92008📍 Vista 92084📍 San Marcos 92069
Why choose us?

Trusted professionals in Oceanside

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Oceanside

All your work handled by qualified professionals in Oceanside

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

283+ Verified Client Reviews in Oceanside

⭐⭐⭐⭐⭐ 4.9/5 · 283 verified Google reviews

Sarah W.
⭐⭐⭐⭐⭐
SW
Sarah W.
Bonsall

“Had them put up a metal roof on our horse barn out in Bonsall, about 40 by 60 feet with a decent pitch. Crew of four knocked it out in three days and the panels are dead straight. My horses are finally out of the weather and I didn't have to worry about a thing.”

Commercial Metal Roofing
Lisa H.
⭐⭐⭐⭐⭐
LH
Lisa H.
Encinitas

“We wanted a real copper awning over the back patio and these guys delivered. The soldering on the seams is beautiful and they even walked me through how the patina will develop over the next few years. Worth every penny.”

Copper Specialty Metal Roofing
James P.
⭐⭐⭐⭐⭐
JP
James P.
Fallbrook

“Our old hay shed roof was rusted through and we needed something that would actually hold up. Oceanside Metal Roofing came out to the property, measured everything, and had new corrugated panels on in under a week. Solid work, fair price, and they cleaned up all the old screws and scrap without me asking.”

Agricultural Metal Roofing
Chris A.
⭐⭐⭐⭐
CA
Chris A.
Oceanside

“They installed a standing seam roof on our 2,400 sq ft house and the whole thing took about five days. The crew was respectful, showed up when they said they would, and the finished roof looks incredible from the street. Only small thing was they left a few metal shavings in the driveway that I had to sweep up myself, no big deal overall.”

Metal Roof Installation
Scott H.
⭐⭐⭐⭐⭐
SH
Scott H.
Carlsbad

“We had a leak around our skylight after the last round of storms and these guys tracked it down fast. Turns out the flashing was shot. They replaced it and re-sealed everything, and we haven't had a drop since. Relieved is an understatement.”

Flashing & Skylight Repair
Karen T.
⭐⭐⭐⭐⭐
KT
Karen T.
Vista

“Replaced our old failing roof with a stone-coated steel system and honestly the house looks brand new. They tore off the old stuff, hauled it all away, and had the new roof on in four days. The foreman kept me updated every single day, which I really appreciated.”

Metal Roof Replacement
Rachel S.
⭐⭐⭐⭐⭐
RS
Rachel S.
Oceanside

“Living a block from the beach, we were worried about salt air eating through another roof. Oceanside Metal Roofing put on a standing seam roof with the right coastal-grade panels and fasteners, and explained exactly why it would hold up. Two months in and it still looks perfect.”

Standing Seam Metal Roofing
Mike J.
⭐⭐⭐⭐
MJ
Mike J.
San Marcos

“Did a metal roof-over on our house instead of a full tear-off and saved a ton of money and time. They laid down the underlayment and new panels right over the old shingles in about three days. I was skeptical at first but the finished job looks clean and the price was way better than a full replacement. Would use them again.”

Metal Roof Over Shingles (Retrofit)
Free Quote

Get Your Free Quote

Metal Roofing in Oceanside · Response within 24h · No commitment · ☎ (442) 333-2316

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Oceanside ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm